Research Progress on Ultra-High-Speed Laser Cladding Technology and Its Coating Wear Resistance

Jing Li; Fazhan Yang

doi:10.63313/AJET.2002

Authors

Jing Li Qingdao University of Technology, Qingdao 266520, China Author
Fazhan Yang Qingdao University of Technology, Qingdao 266520, China Author

DOI:

https://doi.org/10.63313/AJET.2002

Keywords:

Engineering technology, ultra-high-speed laser cladding, coating, wear-resistant and corrosion-resistant, auxiliary laser cladding

Abstract

Ultra-high-speed laser cladding is an advanced surface coating method, which is widely used due to its characteristics of fast processing speed, small heat-affected zone, dense formed coating, and adaptability to multiple materials. This paper first briefly introduces the characteristics and advantages of ultra-high-speed laser cladding compared to traditional laser cladding technology, analyzes the processing principles of ultra-high-speed laser cladding technology, and combines the latest research to analyze the unique characteristics of ultra-high-speed laser cladding technology. Furthermore, the wear resistance of the coating produced by ultra-high-speed laser cladding technology is analyzed, and finally, based on the current research status at home and abroad, the shortcomings of ultra-high-speed laser cladding technology are discussed, and the development trend of ultra-high-speed laser cladding technology is proposed.

References

[1] Wang Mingyuan, Li Wenya, Xu Yaxin, et al. Research Progress on Cold Sprayed Hard Alloy Wear-Resistant Coatings[J]. Surface Technology, 2024, 1-25.

[2] Liu Wei, Tan Zefei, Chen Wengang, et al. Research Status and Development Trends of In-ternal Combustion Engine Piston Ring Materials and Surface Treatment Technologies[J]. Surface Technology, 2024, 1-17.

[3] Lu Yanjun, Luo Hongbo, Zhang Yongfang, et al. Research Progress on Surface Technology of Internal Combustion Engine Piston Component-Cylinder Liner System[J]. Journal of Transportation Engineering, 2022, 22(1): 24-41.

[4] Guo Dongqing, Jia Junhong, Yang Jie, et al. New Advances in Research on Nickel-based Thermal Spraying Self-lubricating Coatings[J]. Surface Technology, 2024, 1-21.

[5] Laser cladding of metals: a review[J]. International Journal of Surface Science and Engi-neering, 21, 2008, 327-336.

[6] Perspectives for Conventional Coating Processes Using High-Speed Laser Cladding[J]. Journal of Manufacturing Science and Engineering, 2022, 144(4): 044501.

[7] Xiao Qian, Xia Jinlong, Gao Xueshan, et al. Investigation of the Microstructure and Wear Properties of Conventional Laser Cladding and Ultra-High-Speed Laser Cladding Alloy Coatings for Wheel Materials[J], Coatings, 2023, 13(5), 949.

[8] Zhang Yu, Lou Liyan, Xu Qinglong, et al. Microstructure and Wear Resistance of Ni-Based WC Coating by Ultra-High Speed Laser Cladding[J]. Acta Metallurgica Sinica, 2020,56(11), 1530-1540.

[9] Zhang Xin, Liu Yi, Lou Liyan, et al. Research on the Microstructure and Properties of Ultra-high-Speed Line Laser Cladding Stainless Steel Coatings[J]. Surface Technology, 2023, 52(1): 336-345.

[10] T Schopphoven, A Gasser, K Wissenbach, et al. Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying[J]. Journal of Laser Applications, 28 (2016), Article 022501

[11] Li Baocheng, Cui Hongzhi, Song Xiao Jie, et al. Wear-resistant properties of ultra-high-speed laser cladding Ni625/WC composite coatings[J]. Surface Technology,2023, 52(11): 237-247.

[12] Microstructure and wear resistance of CoCrFeNiMn coatings prepared by ex-treme-high-speed laser cladding[J]. Surface and Coatings Technology, 470(15), 2023, 129821.

[13] Li Hui, Liu Pengyu, Li Zhihui, et al. Research on the Surface Repair Process of Casting and Rolling Roller Sleeves by Ultrahigh-Speed Laser Cladding[J]. Hot Working Process, 2024, 1-6.

[14] Zhang Xin, Liu Yi, Lou Liyan, et al. Research on the Microstructure and Properties of Ultra-high-Speed Line Beam Laser Cladding Stainless Steel Coatings[J]. Surface Technology, 2023, 52(1): 336-345.

[15] Li Chaohui, Li Meiyan, Han Bin, et al. Microstructure and Wear Resistance of High-Pressure Piston High-Speed Laser Cladding Nickel-Based Alloy Coating[J]. Surface Technology, 2020, 49(10): 45-54.

[16] Lou Liyan, Zhang Yu, Xu Qinglong et al. Microstructure and properties of ultra-high-speed laser cladding low dilution rate metal coatings[J]. China Surface Engineering, 2020, 33(2): 149-159.

[17] Hou Dongshuai, Zhang Kaixuan, Fenhong, et al. The corrosion deterioration of reinforced passivation Film: The impact of defects[J]. Applied Surface Science, 2022, 30(582), 152408.

[18] B Shen, Du. Borui, M Wang, et al. Comparison on Microstructure and Properties of Stainless Steel Layer Formed by Extreme High-Speed and Conventional Laser Melting Deposition[J]. Front. Mater., 2019, 6, 248.

[19] Ji Chunyuan, Huang Lei, Xu Jiale, et al. The High-Temperature Oxidation Resistance of Ul-trasonic Vibration-Assisted Laser Cladding IN718-Hf Coatings[J]. Surface Technology, 2023, 52(9): 199-208.

[20] Li Meiyan, Han Bin, Wang Yong, et al. Investigation on laser cladding high-hardness nano-ceramic coating assisted by ultrasonic vibration processing[J], Optik, 2016, 11(127), 4596-4600.

[21] Liu Mingxia, Li Zhao, Chang Gengrong, et al. The effect of laser re-melting on the micro-structure and corrosion resistance of high-speed laser cladding Ni625 alloy coatings[J]. Journal of Materials Heat Treatment, 2022, 43(8).